-

Flap Barriers

  • Home
  • Products
  • Barriers
  • Flap Barriers

Flap Barriers

Description

Flap Barriers are well adopted in entrances and exits of offices or construction sites, to help to track staffs and visitors, only authorized users are able to access to specific areas through the flap barriers. Lights on the barriers are to indicate the status of the flap barriers. Steady green lights indicate locked barriers. Blinking green lights indicate accessible barriers.

We integrate access control system with the flap barrier for authoritative access. RFID, Biometric verification, Face recognition, and vein verification technologies are options for flexible access control system. Flap barrier is installed in conjunction with any access control system and provides valuable assistance to security personnel at any monitored entrance. This Flap barrier is available as a single or multiple-lane setup.The flap barrier combine features like high throughput rate, user acceptance, comfort, attractive design and different levels of security to prevent unauthorized access pedestrian safety has also been taken into account.

Features

32-bit high-speed processor

TCP/IP network communication

Permissions validation and anti-tailgating

Remaining open/closed mode selectable

Remote control and management

Online/offline operation

Anti-forced-accessing.

Bidirectional (Entering/Exiting) lane

The barrier opening and closing speed can be configured according to the visitor flow

The barrier will be open or stop working when people are nipped

Self-detection, Self-diagnostics, and automatic alarm

LED indicates the entrance/exit and passing status

Audible and visual alarm will be triggered when detecting intrusion, tailgating, reverse passing, and climbing over barrier

TECHNICAL DATA
Communication interface
TCP/IP × 1, Wiegand × 2, alarm output × 4, event input × 4, lock × 2, exit button × 2, RS-232× 4, RS-485/RS-232 × 6
IR light detectors
12 pairs
IR light detectors
12 pairs
Throughput
20 to 60 persons per minute The actual throughput is affected by the person passing rate and passing environment.
Card Capacity
3000 visitor cards 60,000 cards except for visitor cards
Power supply
100 to 240 VAC, 50 to 60 Hz
Working temperature
-20 °C to 70 °C (-4 °F to 158 °F)
0% to 95% (No condensing)
600 mm (23.62")
Barrier material
Acrylic
Dimension (W × H × D)
300 mm × 1010 mm × 1406.8 mm (11.81" × 39.76" × 55.38")
Weight
Without package: 90 kg (198 lb) With package (carton): 100 kg (221 lb)

Maintenance

Description

There are only a few simple steps you need to follow in order to maintain the quality and performance of your pedestrian access control solutions:

    Select different stainless steel types according to the variety of the environments. You can select 304 stainless steel for common circumstances and 316 stainless steel for the scenarios of seasides and chemical plants. Clean them regularly. In retail areas pedestrian access control equipment is made to look visually pleasing. To keep them looking as good as when you brought them it is important to clean them regularly. Surfaces should be cleaned with a soft cloth and, where applicable, a good stainless steel cleaning product. Avoid using harsh cleaners as these may only damage or leave marks on any mirror finish.
  • Check for dents, scratches and marks. Abuse of any pedestrian access equipment is the most common reason that the device may need repair or replacement. Closely monitor your equipment and check for parts that are damaged. For full height turnstiles, check for slight bending or leaning of arms; this may signify loose rotor brackets that must be attended to before they get worse. Flaps on flap barriers and arms on supermarket gates should also be checked to ensure they have not been manually forced in any way. This might cause misalignment preventing them from opening or closing correctly.
  • Preventative maintenance. Full height and waist height turnstiles are fully sealed with an IP65 protection. However the drop arm and flap barriers do need to be cleaned when necessary of general grime and insect infestations to keep them in optimal working order.
  • Lubricate once a year. Use a synthetic grease to lubricate the moving parts of your machine at least once a year.
  • With these simple steps, you can greatly improve the longevity and durability of your turnstiles and other pedestrian barriers.
    • APPLICATION
    It park Hospital Commercial building Airport Government office
    Shooping mall Sea ports Railway station Toll tax booth Housing societys Apartments